Product News (November 2014)

The AMI Silica Family

Our first member of the AMI Silica Family is our AMI Silica, which was introduced in 2011. Our AMI Silica covers a wide range of applications (water steam cycles, cooling- and surface water) due to its wide measuring range.

One of our new family members is our AMI Silitrace, which complements our Silica Family. With its tempered photometer, it is suggested to use our AMI Silitrace for all low temperature applications as the instruments measuring range starts at 0,5ppb, which makes the AMI Silitrace ideal for applications such as Make-up Water, all pure water treatment systems and Condensate. Read more...

Our other new family member is our AMI Silitrace Ultra. This analyser is our designated Ultrapure Water & Semicon instrument. We are pleased to say that our AMI Silitrace ultra is the only instrument on the market which is able to measure low silica concentration levels to fulfil the strict limits of the new guideline of the International Technology Roadmap for Semiconductors (0,01ppb/10ppt). Our AMI Silitrace Ultra will replace our COPRA Silitrace.

The AMI Silica still remains the ideal instrument for Boiler Water and Steam application where the expected silica values are higher than 1,0ppb. Read more...

silicafamily.gif

Product News (October 2014)

AMI Phosphate HL (High Level)

 

The new AMI Phosphate HL is available. Reliable measurement of high phosphate concentration levels is now possible with an easy to maintain online instrument.

 

The new photometer is using a colorimetric measurement according to APHA 4500-P C. Vanadate-Molybdate method. Features include sample flow surveillance and a low reagents detection level switch, making our new analyser a highly reliable, precise and accurate instrument.

 

With its wide measurement range (0.1 to 50ppm)
the AMI Phosphate HL is the ideal instrument to measure high level phosphate concentrations in boiler water and district heating plants. For cooling water and waste water applications, an optional cleaning module is available.

 

Read more

 

 

 

IXA25421300 AMI Phosphate_HL_low.jpg

A New Year - A New Era in Turbidity Instrumentation

IXA2541X6011_AMI_Turbiwell_7027
Greeting from the team at SWAN Analytical USA:
SWAN Analytical Instruments has recently intriduces a nephelometric system for the automatic and continuous measurement of turbidity in potable water, surface water and effluent. The SWAN White LED method of measuring turbidity has been approved by the US EPA as an alternative to method 180.1.

Introducing the SWAN Turbiwell System
The system has no direct contact with sample, therefore the optical elements do not foul.
The instrument is factory calibrated, panel mounted and ready for installation.
Additional callibration are not required for the life of the instrument.
The measuring range is 0-100 NTU.
We provide a four year warranty.

For more information or to arrange for a demonstarion of the Turbiwell or any of SWANs line of products, please contact:

SWAN Analytical USA, Inc.
Sales Team
225 Larkin Drive Unit 4
Wheeling, IL 60090
Tel 847-229-1290
sales@swan-analytical-usa.com

New Years Wishes to All,
Jeff Parke
President

Dominic O'Donnell

We are pleased to announce the addition of Dominic O'Donnell to the SWAN team. As our new Inside Sales and Marketing Manager, Dominic will provide sales support to our field sales team, manufacturers' representatives and house accounts. In addition he will implement our trade show, advertising and newsletter activities and will be developing new marketing initiatives to expand SWAN's service and contacts with our customers. Dom has strong skills in marketing, customer service, data management and technical product management. Please feel free to reach out to him and welcome him to the SWAN team.

AMI Silica

IXA25431300_AMI_Silica.jpg
AMI Silica

We are pleased to announce the release of the newly developed AMI Silica.

The Silica analyser is now fitted with the new Periclip pump and 2 litre reagent canisters, for the ease of maintenance and uses the well proven continuous flow photometry.

The analyser is intede for Silica measurement mainly in water steam cycles, cooling- and surface water.

The analyser can be equipped with an optional 2nd sample stream switching valve or connected to the AMI Sample Sequencer for up to 6 sample streams.

Read more...

AMI Line TOC - The elegant way of TOC measuring

Since its launch in 2011, many leading representatives of the pharmaceutical industry have been convinced by the benefits of our TOC-Analyzer, the AMI LineTOC.

 

To meet the specific needs of the pharmaceutical industry, we have listened to our customers in order to continually develop and improve our TOC-Analyzer over time.

 

The focus of the development of the TOC-Analyzer concentrated on three areas:

  • The precision and accuracy of direct UV-oxidation have been verifiably improved by means of technical optimizations
  • The analyzer can be reviewed at regular intervals by an automatic function test
  • The user-friendly design of the device and the possibility to also test grab samples, provide additional reassurances in operation

 

All these changes are included in our current analyzer AMI LineTOC, making it cutting edge technology able to cope with future demands.

Read more about innovations to improve the accuracy and reliability of UV oxidation direct conductivity TOC measurement methods in the attached article.

 

IXA23612100_AMI_LineTOC.jpg

New: AMI Hydrogen QED Monitor

IXA22851000_AMI_Hydrogen_QED_Low.jpg
New AMI Hydrogen QED Monitor

We are pleased to announce the latest SWAN Analyser for use in continuous measurement of key water quality parameters in steam cycles.

Hydorgen monitoring is becoming increasingly important in corrosion monitoring. At high temperatures, water in contact with iron results in corrosion. Following the Schikorr reaction, the AMI hydrogenQED measures the hydrogen released as a by-product during the formation of magnetite and the hematite layer. The hydrogen concentraiton us a direct measure of the rate of the corrosion, alerting operators before excessive levels lead to corrosion.

Read More...

Integrated auto verification with faraday electrode setup.
Factory tested, ready for us.
Range: 0,1 - 800 ppb or 0 - 50% saturation (at 25°C9
Automatic pressure and temperature compensation.

NEW: Analyzer AMI Codes-II HC

NEW: Analyzer AMI Codes-II HC

 

We have the pleasure to announce our newly developed analyzer for elevated concentrations of chlorine. It is especially designed for application in reuse water processing, wastewater and sanitation water where the usual disinfection concentrations are much higher compared to e.g. potable water processing.

 

While most of the analytical system is based on the well-proven design of our Codes-II product family we developed a new process-photometer based on the Iodometric-Method (AWWA 4500-Cl C) to provide the wide measuring range from 5 to 50 ppm.

 

The well-known Cleaning Module II can be connected and is especially recommended for wastewater and effluent applications.

IXA25441200_AMI_Codes-II_HC.jpg

Inspector Hydrogen

IXA75400000_AMI_INSPECTOR_Hydrogen.jpg
AMI Inspector Hydrogen

Our new portable, battery powered AMI Inspector Hydrogen for measurement of dissolved hydrogen in water steam cycle is now available.

  • Swansensor Hydrogen with platinum anode and silver cathode
  • Measurement range from 0ppb to 800ppb of dissolved hydrogen
  • Integrated NT5K temperature sensor
  • Sample flow surveillance
  • Needle valve for sample flow control
  • Rechargeable battery for stand-aline operation for at least 24 hours
  • Low maintenance and user firendly
  • Two current wignal outputs
  • Equipped with USB interface

Spotlight Sodium P

IXA24411100_AMI SodiumP_SCHOTT
AMI Sodium P

The AMI Sodium P measures dissolved sodium in feedwater, steam and condensate. An ideal for our friends in the power industry, the Soidum P features a measurement range of 01. - 10,000 ppb.
Other important features of the Sodium P include: Read more...

If you would like further information on the AMI Lines TOC, Sodium P, or any other SWAN instrument, please contact us!

SWAN Analytical USA
225 Larkin Drive, Unit 4
Wheeling, IL 60090
Tel: (847) 229-1290
Fax: (847) 229-1320
sales@swan-analytical-usa.com

Successful Launch of the AMI Line TOC in the Pharmaceutical Industry

We are please that since its launch in 2011 we had the chance to convince leading representatives of the pharmaceutical industry of our TOC-Analyser. The experience gained and the positive feedback from our customers show us that we are on the right track with our TOC-Analyser.

Read More

In order to meet the specific needs of the pharmaceutical industry, we have steadily developed our TOC-Analysers in recent years.
The focus of the development of the TOC-Analyser concentrated on three areas:
  • The precision and accuracy of direct UV-oxidation have been verifiably improved by means of technical optimizations
  • The analysers can be reviewed at regular intervals by an automatic function test
  • The user-friendly design of the device and the possibility to also test grab samples, provide additional relief in operation
All these changes are included in our current analyser AMI LineTOC making it cutting edge technology being able to cope with future demands.

IXA23612100_AMI_LineTOC.jpg

Jeff Parke

Jeff-Parke.jpg
We are happy to announce the retirement of Jeff Parke from SWAN Analytical USA, Inc.. Jeff has served SWAN as a leader in SWAN^s business development, personnel mentoring and a project leader in many important areas. His contributions to SWAN's success in the US are greatly appreciated. We wil lmiss his friendy humor and thoughtful leadership and wish him all the best in the future.